auto winding insertion machine

Semi-auto Washing Machine Motors Coil Winding Machine with Simple Structure SMT-R160 1. It is suitable for multi-connected and multi-layerwinding. 2. The number of coils it can wind is up to 8 at a time. 3. Automatic slot change, starting winding position, idling start, idling stop, double-ended stop, automatic reset and automatic start could be set in control system. 4. There are two alternate spindles to facilitate higher output. 5. It can be applied to all kinds of micro

Economic Type Fan Cooler Motor Stator Coil Forming Machine SMT - KZ160 After coil insertion process, the upper and bottom side of coil will not be the same shape. Therefore, coil forming will be needed before next process. After forming, the coil will be expanding and easy for the next time insertion. Both slot paper and wedge should not be damaged or turned over. The stator should not be deformation or stator lamination should not be upward. There is no wire enamel broken.

Automatic Stator Coil Middle - Forming Machine After Lacing SMT - ZJ160

Automatic Double Sides Stator Wire Lacing Machine 25-100mm for LD Motor with SGS Audit Report SMT-BZ41 The products are mainly applied in new energy automobile motor, servo motor, generator, three-phase motor, pump motor, compressor motor, household appliance motor and other induction motors. As a world leader, we have obvious advantages in stator and rotor core assembly, slot insulation, auto winding, auto inserting, auto fusing, auto resin impregnation and other motor

Auto Double-station Horizontal Stator Winding Machine For Copper Wire (1) Main Specification Item Data Model WR100 Wire diameter Φ0.15~Φ0.8mm No-load Speed 800r/min Suitable wire copper/aluminum Max. Transfer distance ≤250mm Diameter of frame Φ20-Φ120mm Power supply 220V, single phase, 50/60Hz, 1.5kW Machine weight About 1000kg Machine dimension (LxWxH) 1050 x 1800x 1500mm (2) Application: The products are mainly applied in new energy automobile motor, servo motor, generator,

Two Stations Automatic Stator Winding Machine For Fan Stator 3HP SMT-WR100 (1) Main Machine's Information Model WR100 Wire Diameter 0.15-0.8mm Rotating Speed 800r/min Winding head 2pcs Swing diameter 250mm Max. winding distance 160mm Air Pressure 0.4-0.7Mpa Power Supply 220V/50/60Hz 1.5Kw MOQ 1pcs Dimension (L)1050*(W)1800*(H)1500mm (2) The operation steps of this machine Production efficiency of this machine Around 1000pcs/8 hours,it is only a rough idea, depends on the

Strong and Durable Automatic Stator Winding Machine / Coil Winding Machine SMT - DR450 (1) Description Model R650 Swing diameter ≤450mm Effective length of the tooling ≤400mm Parallel wire number ≤16pcs Wire diameter 0.3-1.2mm Wire arraying width 400mm Power supply 220V/50/60Hz 2.2Kw Machine weight 950kgs Air Pressure 0.4-0.6MPa Machine dimension (L)1500*(W)1700*(H)1550mm (2) Application This machine is suitable for 2 poles, 4 poles and 6poles coils winding. (3) Machine main

Automatic Coil Winding Machine For Rotor And Stator AC Motor ODM/OEM SMT-DR08 (1)Main Technical Parameter Model DR08 Wire Diameter 0.08-0.8mm No - load Speed ≤3000r/min Winding head 8pcs Diameter of frame 20-120mm Max.Transfer distance ≤250mm Air Pressure ≥0.4MPa Power Supply 220V/50/60Hz 0.75Kw Weight 850kgs Dimension (L)1500*(W)1200*(H)2100mm (2) The operation steps of this machine Around 1000pcs/8 hours,it is only a rough idea, depends on the armature slots number and turn

Automatic Compressor Motor Stator Coil Final Forming Machine SMT - ZZ160 This machine is used for small to middle motor stator coil forming after coil insertion, could shape the stator end coil OD, ID and height approaching to required size via initial extruding, and good for the next coil lacing process,with single-tooth slot insulation protective device. It is driven by hydraulic system; PLC programming; whole schematic design of inner expansion, outer wrapping and edge