motor coil winding insertion tool

Customized Motor Stator Automatic Manufactory Production Assembly Line (1) Main Technical Features Model SMT-QX10 Stator I.D 110-210mm Stator O.D ≤260mm Core Length ≤250mm Tooling stroke ≤90mm Compatible wire CU/AL Slot number range 24-48 slots Power supply 380V/50/60Hz 6.5Kw Weight 1160kg Dimension (L)2370×(W)1260×(H)1710mm (2) Application The products are mainly applied in new energy automobile motor, servo motor, generator, three-phase motor, pump motor, compressor motor,

SMT - C100 Slot Insulation Machine 10-90 mm Core Length Abrasion Resistance It will be better if customer could send us detailed drawing including below information.1. Stator lamination drawing2. Stator stack drawing3. insulation paper drawing and its material4. Stator application5. Required productivity (1) Main Technical Data Model C100 Core Length 10-90mm Stator I.D 20-80mm Stator O.D ≤140mm Height of edge folded 2-4mm Insulation paper’s thickness ≤0.35mm Efficiency 0.5s/s

Servo Coil Inserting Machine For 100-200mm Stator ID Product Description Servo Coil Inserting Machine 100-200mm Stator ID lS0/ SGS Audit Application Suitable for stators used in single phase motors, three phase motors, compressor motors, starter motors, washing machine motors, air conditioners, and more. This machine automatically inserts coils and wedges into stators. Slot number, coil pushing speed, and wedge length are adjustable via HMI, making it suitable for various

Armature Insulation Paper Inserting Machine for DC Motor, Wiper Motor Electric Motor Machine SMT - CD150 Wedge forming and cutting machine is used for making stator wedge, automatic paper feeding,forming and cutting. Paper feeding by stepping motor; double-row tool to cut paper; paper feeding length, cutting speed could be set in human-machine interface.Temperature of heating device before final forming is adjustable. Only need to assemble the wedge on the material feeder

Armature Insulation Paper Inserting Machine for DC Motor, Wiper Motor Electric Motor Machine SMT - CD150 Wedge forming and cutting machine is used for making stator wedge, automatic paper feeding,forming and cutting. Paper feeding by stepping motor; double-row tool to cut paper; paper feeding length, cutting speed could be set in human-machine interface.Temperature of heating device before final forming is adjustable. Only need to assemble the wedge on the material feeder

Double Side Lacing Machine (Full Servo) / Motor Coil Lacing Machine Loading stator vertically; equipped with pressing, automatic feeding, automatic cutting device, etc,; overhang winding adpots twin needle lacing by servo system simultaneously; needle transpositioning, hookin and stator indexing are controlled by servo system; spindle adopts frequency speed control; slot by slot lacing, interval lacing, and fancy lacing could be achieved by setting in human-machine interface;

Double Sides Motor Stator Coil End Automatic Lacing Machine / Lacing Machine SMT - BZ190​ 1. Loading stator vertically; 2. equipped with pressing, automatic feeding, automatic cutting device, etc.; 3. overhang winding adopts twin needle lacing by servo system simultaneously; 4. needle transposition, hooking and stator indexing are controlled by servo system; 5. spindle adopts frequency speed control; 6. slot by slot lacing, interval lacing and fancy lacing could be achieved

Motor Servo Double Side Coil Lacing Machine Motor Production Machine SMT - DB190 Each lacing machine is PLC controlled with an inverter drive and can be fully programmed to suit different stator slot configurations. Stator support tooling is very quick to changeover between different stator laminations and stack heights. A wide range of standard lacing needles are available. This lacing machine is suitable for lacing multi-species, less yield or more lead wire stator. This

Automatic Coil Lacing Machine Double Sides Lacing For AC Motor Industrial Motor Automatic Coil Lacing Machine Double Sides Lacing for AC Motor Industrial Motor This machine is consist of machine body, needle, nozzle rotating part, needle fore and back movement,nozzle swing part, needle up and down movement part, stator indexing part,thread feeding,thread cutting part. (1) Main Technical Information Model SMT-BZ51 Stack height 17~100mm Stator I.D Φ25~ Φ100mm Stator O.D ≤Φ160mm